Glossy enamel is professional Watercolor series

Description

Method of application: It is necessary to prepare the surface beforehand: clean from old coatings, grind and degrease • Before applying enamel, it is recommended to use ZEBRA dry quick-drying agent • Apply at a temperature of + 15- + 30 ° С • Shake the bottle for about minutes to stir the contents. This will allow for homogeneity of the coating. • In the process of work, it is necessary to shake the cylinder from time to time. • Spray test spill. • Apply a small amount of enamel in a discreet place and check for compatibility with the coating. • During application, the cylinder should be held upright. Enamel should be sprayed with a thin layer at a distance of 25-30 cm from the surface that is painted. • To achieve maximum effect, apply the enamel better in 2-3 layers at intervals of 3-5 minutes. • In case of incomplete consumption of the material, it is necessary to turn the bottle upside down and spray it until it is completely discolored. This will prevent the material from dampening in the valve and will allow the use of the balloon in the future.