Wcdma
•Download as PPT, PDF•
0 likes•3,727 views
Sangram Keshari Nayak presented a technical seminar on W-CDMA at the National Institute of Science and Technology. W-CDMA stands for Wideband Code Division Multiple Access, which is a 3G network that uses a 5MHz carrier spectrum and has higher capacity than previous networks. The presentation covered topics such as how CDMA works, the differences between CDMA variants, W-CDMA characteristics and parameters, design issues like turbo coding and interference cancellation, the WCDMA system, radio network functionality including power control and soft handover, and upgrading from GSM to WCDMA networks.
Technology
Report
Share
Report
Share
![Technical Seminar Presentation
“W-CDMA”
National Institute of Science and Technology [1]
Presented by
Sangram Keshari Nayak
Roll#EC200117075
Under the guidance of
Mr. N. Srinivasu
Sangram Keshari Nayak(EC200117075)](https://image.slidesharecdn.com/wcdma-141027021154-conversion-gate02/85/Wcdma-1-320.jpg)
![Technical Seminar Presentation
WHAT IS W-CDMA?
National Institute of Science and Technology [2]
W-CDMA stands for wideband code division
multiple access
A 3G network having higher capacity
Uses a spectrum with 5MHz carrier
Sangram Keshari Nayak(EC200117075)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
WCDMA
WCDMA Harshal Tiwari
The document is a seminar report on Wideband Code Division Multiple Access (WCDMA) technology. It discusses the basics of WCDMA, including that it uses code division multiple access to separate users and spread signals over a wide 5MHz bandwidth. It also covers WCDMA specifications, generation, spreading principles, power control, handovers, and advantages such as service flexibility and spectrum efficiency. W cdma
W cdma Deepak Kumar Dhal
W-CDMA is a 3G mobile technology that provides higher data speeds than previous technologies. It was developed by 3GPP and first launched commercially by NTT DoCoMo in Japan. W-CDMA uses CDMA to allow multiple signals over one channel, with each user assigned a unique code. It employs spread spectrum techniques like direct sequence SS and frequency hopping SS. The presentation provides information on W-CDMA history, duplexing, multiple access techniques, coding and decoding, applications, and concludes it is a growing mobile technology. Wcdma umts wireless networks
Wcdma umts wireless networks Dee Lima
This document provides an overview of 3rd generation WCDMA/UMTS wireless networks. It describes the evolution from 2G to 3G networks and the key aspects of WCDMA/UMTS architecture, including the air interface, radio access network, core network and radio resource management functions such as admission control, load control, packet scheduling, handover control and power control. The document also briefly discusses additional topics such as radio network planning issues, high speed data packet access, and a comparison of WCDMA and CDMA2000. Multiple access techniques for wireless communication
Multiple access techniques for wireless communication Dr.Umadevi V
This document discusses multiple access techniques for wireless communication. It begins with an introduction to how multiple access schemes allow efficient sharing of limited radio spectrum among multiple users. It then provides a brief history of wireless communication and pioneers. The document goes on to explain various multiple access techniques in detail including FDMA, TDMA, CDMA, SDMA, and CSMA. It describes their applications, advantages, and disadvantages. Forward and reverse link power control in CDMA is also summarized. Presentation on 4gLTE
Presentation on 4gLTE shanu singh chauhan
dear viewer go through this slides you will sure get the idea about this topic.it will help you on presentation on 4glte. 3G Radio Network Planning
3G Radio Network Planning toha ardi nugraha
This document summarizes a presentation on radio network planning for 3G networks. It discusses key concepts in radio network planning like cell configuration, interference management, frequency reuse, and mobile network evolution. It then covers the specific steps in 3G radio network planning, including dimensioning, nominal planning, simulation, and optimization. The document provides examples of link budget calculations and using planning software to simulate network performance and verify the design meets requirements. LTE (Long Term Evolution) Introduction
LTE (Long Term Evolution) Introduction Guisun Han
This slide for your understanding on LTE !
LTE, the wireless access protocol for 4G mobile network service, has evolved from GSM and WCDMA based on 3GPP!
The contents of this slide is below;
I. LTE Introduction
II. LTE Protocol Layer
III. SAE Architecture
IV. NAS(Non Access Stratum) Protocols
V. EPC Protocol Stacks
With my regards,
Guisun Han Cdma ppt for ECE
Cdma ppt for ECE ajitece
CDMA is a digital cellular technology that allows multiple users to access a single radio channel simultaneously through the use of unique code assignments. The document discusses CDMA network architecture, which includes mobile stations, base stations, base station controllers, mobile switching centers, home and visitor location registers, and authentication centers. It also compares CDMA to earlier multiple access technologies like TDMA and FDMA, noting advantages of CDMA like increased capacity and soft handoffs between cells using the same frequency.Recommended
WCDMA
WCDMA Harshal Tiwari
The document is a seminar report on Wideband Code Division Multiple Access (WCDMA) technology. It discusses the basics of WCDMA, including that it uses code division multiple access to separate users and spread signals over a wide 5MHz bandwidth. It also covers WCDMA specifications, generation, spreading principles, power control, handovers, and advantages such as service flexibility and spectrum efficiency. W cdma
W cdma Deepak Kumar Dhal
W-CDMA is a 3G mobile technology that provides higher data speeds than previous technologies. It was developed by 3GPP and first launched commercially by NTT DoCoMo in Japan. W-CDMA uses CDMA to allow multiple signals over one channel, with each user assigned a unique code. It employs spread spectrum techniques like direct sequence SS and frequency hopping SS. The presentation provides information on W-CDMA history, duplexing, multiple access techniques, coding and decoding, applications, and concludes it is a growing mobile technology. Wcdma umts wireless networks
Wcdma umts wireless networks Dee Lima
This document provides an overview of 3rd generation WCDMA/UMTS wireless networks. It describes the evolution from 2G to 3G networks and the key aspects of WCDMA/UMTS architecture, including the air interface, radio access network, core network and radio resource management functions such as admission control, load control, packet scheduling, handover control and power control. The document also briefly discusses additional topics such as radio network planning issues, high speed data packet access, and a comparison of WCDMA and CDMA2000. Multiple access techniques for wireless communication
Multiple access techniques for wireless communication Dr.Umadevi V
This document discusses multiple access techniques for wireless communication. It begins with an introduction to how multiple access schemes allow efficient sharing of limited radio spectrum among multiple users. It then provides a brief history of wireless communication and pioneers. The document goes on to explain various multiple access techniques in detail including FDMA, TDMA, CDMA, SDMA, and CSMA. It describes their applications, advantages, and disadvantages. Forward and reverse link power control in CDMA is also summarized. Presentation on 4gLTE
Presentation on 4gLTE shanu singh chauhan
dear viewer go through this slides you will sure get the idea about this topic.it will help you on presentation on 4glte. 3G Radio Network Planning
3G Radio Network Planning toha ardi nugraha
This document summarizes a presentation on radio network planning for 3G networks. It discusses key concepts in radio network planning like cell configuration, interference management, frequency reuse, and mobile network evolution. It then covers the specific steps in 3G radio network planning, including dimensioning, nominal planning, simulation, and optimization. The document provides examples of link budget calculations and using planning software to simulate network performance and verify the design meets requirements. LTE (Long Term Evolution) Introduction
LTE (Long Term Evolution) Introduction Guisun Han
This slide for your understanding on LTE !
LTE, the wireless access protocol for 4G mobile network service, has evolved from GSM and WCDMA based on 3GPP!
The contents of this slide is below;
I. LTE Introduction
II. LTE Protocol Layer
III. SAE Architecture
IV. NAS(Non Access Stratum) Protocols
V. EPC Protocol Stacks
With my regards,
Guisun Han Cdma ppt for ECE
Cdma ppt for ECE ajitece
CDMA is a digital cellular technology that allows multiple users to access a single radio channel simultaneously through the use of unique code assignments. The document discusses CDMA network architecture, which includes mobile stations, base stations, base station controllers, mobile switching centers, home and visitor location registers, and authentication centers. It also compares CDMA to earlier multiple access technologies like TDMA and FDMA, noting advantages of CDMA like increased capacity and soft handoffs between cells using the same frequency. Chap 4 (large scale propagation)
Chap 4 (large scale propagation) asadkhan1327
This document discusses mobile radio propagation and propagation models. It begins by introducing how radio channels are random and time-varying. It then covers the free space propagation model and how received power decreases with distance. Reflection, diffraction, and scattering are described as the main propagation mechanisms. The two-ray ground reflection model is presented to model propagation over large distances. Diffraction is explained using the knife-edge diffraction model. Fresnel zones and diffraction gain are also defined. DWDM Presentation
DWDM Presentation ayodejieasy
This document provides an overview of Dense Wavelength Division Multiplexing (DWDM) technology. It discusses key topics such as optical transmission, DWDM components like multiplexers/demultiplexers and amplifiers, DWDM networks and topologies, and transmission quality parameters. The presentation contains 32 slides and is intended to briefly explain DWDM as a means of achieving effective fiber-optic transmission and increasing bandwidth. Gsm channels concept
Gsm channels concept Telebeansolutions
GSM uses frequency division duplexing with carriers separated by 200 kHz. Each carrier is divided into 8 time slots using TDMA. Logical channels like traffic channels and signaling channels are mapped onto these physical time slots. Traffic channels carry user data at either full rate or half rate, while signaling channels include broadcast, common, and dedicated control channels used for functions like synchronization, paging, call setup, and handover. Diversity techniques presentation material
Diversity techniques presentation material Nini Lashari
This document discusses various diversity techniques used in wireless communications to combat fading. It describes types of diversity including time, frequency, multiuser, and space diversity. It also outlines combining techniques such as selection combining, maximal ratio combining and equal gain combining that are used to improve the signal by combining signals from multiple diversity branches. The document concludes by discussing multiple input multiple output (MIMO) systems and orthogonal frequency division multiple access (OFDMA) schemes that exploit diversity and multiuser diversity. 02 umts network architecturenew
02 umts network architecturenew sivakumar D
This document provides an overview of UMTS network architecture and components. It describes the key elements of the UMTS Release 99 core network, including the circuit switched and packet switched domains. It also discusses the radio access network (UTRAN) and its components such as the radio network controller (RNC) and Node B. Finally, it summarizes the functions of the mobile switching center (MSC) and media gateway (MGW) in the UMTS network. Gprs architecture
Gprs architecture DeekshithaReddy23
GPRS Architecture and its components are covered extensively.
The slides give a little information about gprs and also gets into deeper explanation of its architecture. Ofdma
Ofdma fazida76
Orthogonal Frequency Division Multiple Access (OFDMA) is a multiple access technique that uses OFDM and FDMA. It divides the available bandwidth into multiple orthogonal subcarriers, assigning subsets of subcarriers to individual users. This allows for efficient use of spectrum and multi-user diversity. OFDMA provides better performance in fading environments compared to CDMA. However, it suffers from high peak-to-average power ratio and requires tight synchronization between users. OFDMA is used in wireless standards like WiMax due to its ability to support high data rates and combat intersymbol interference. WDM & Optical Amplifiers
WDM & Optical Amplifiers Eng_Ahmad
This document provides an overview of wavelength division multiplexing (WDM) technology. It begins with introducing optical fibers and their components. It then discusses multiplexing techniques like time-division multiplexing (TDM) and frequency-division multiplexing (FDM). The document focuses on WDM, defining it as a technology that multiplexes multiple optical signals on a single fiber using different laser light wavelengths. It describes dense WDM (DWDM) and coarse WDM (CWDM), and compares their wavelength spacing and applications. The document also outlines optical amplifiers like erbium-doped fiber amplifiers and their uses. In conclusion, it states that WDM enables high-speed, high-capacity data transmission and Lte Tutorial
Lte Tutorial Pengpeng Song
LTE was developed to meet increasing demands for mobile data traffic by improving key metrics like latency, throughput, capacity and coverage compared to HSPA. It features flexible bandwidths up to 20MHz, simplified network architecture, advanced antenna techniques and OFDMA/SC-FDMA based access for downlink and uplink respectively. LTE supports peak rates of 300Mbps downlink and 75Mbps uplink depending on UE category and bandwidth. It adopts an all-IP flat architecture with simplified all-packet based transmission procedures. Presentation on CDMA
Presentation on CDMA Shuvangkar Dhar
CDMA stands for Code Division Multiple Access. It is a digital wireless communication technology that allows multiple users to access a single channel using unique code assignments. CDMA has evolved through standards like IS-95, CDMA2000, and WCDMA. It provides benefits like increased capacity, soft handoffs, and lower power consumption compared to other technologies. While CDMA has advantages, it also faces challenges like higher licensing costs and reduced coverage area with increasing subscriber loads. Overall, CDMA remains an effective multiple access technique for wireless communications. Wimax ppt
Wimax ppt OECLIB Odisha Electronics Control Library
This document summarizes a seminar presentation on WiMAX technology. It describes WiMAX as a wireless broadband technology based on the IEEE 802.16 standard that can provide internet access within a range of up to 31 miles. Key points covered include the basic components of a WiMAX system including towers and receivers, how WiMAX connections work, advantages over other technologies like speed and lack of wired infrastructure, and future applications like integrated laptop access. Issues discussed are the challenges of network deployment and lower costs compared to 3G mobile networks. Gsm.....ppt
Gsm.....ppt balu008
Global System for Mobile (GSM) is a second generation cellular standard developed for voice services and data delivery using digital modulation. It has a network subsystem including components like the MSC, HLR, VLR, and AuC that handle call processing and subscriber information. The radio subsystem consists of BSCs controlling multiple BTSs to manage radio network access. GSM provides international roaming, high quality voice calls, and supports data services like SMS and fax in addition to voice. Wireless Local Loop
Wireless Local Loop Sri Manakula Vinayagar Engineering College
Wireless local loop (WLL) provides wireless connections for stationary users as an alternative to wired connections. It targets the "last mile" between a neighborhood access point and end users. Key advantages include lower installation costs than wiring due to reduced digging and infrastructure requirements, as well as rapid deployment. WLL systems face challenges around spectrum licensing, maintaining wireline-level service quality, and planning networks to achieve high penetration levels while supporting limited user mobility within coverage areas. Common WLL technologies include cellular, satellite, and fixed wireless access using licensed or unlicensed spectrum. Chapter 7 multiple access techniques
Chapter 7 multiple access techniques Kaushal Kabra
Multiple access techniques allow multiple users to share finite radio spectrum resources simultaneously. They can be categorized as narrowband or wideband. Common techniques include FDMA, TDMA, CDMA, and SDMA. FDMA divides the total bandwidth into narrow channels that are allocated to users. TDMA divides each channel into time slots that are allocated to users. CDMA spreads the signal over a wide bandwidth using pseudo-random codes and allows multiple signals to overlap in both time and frequency. Umts system architecture
Umts system architecture Midhun S
Universal Mobile Telecommunications System (UMTS) a 3G cellular system for networks based on the GSM standard. GSM channels
GSM channels Mohd Nazir Shakeel
Physical channels carry information over the air interface between the mobile station and base transceiver station. Logical channels map user data and signaling information onto physical channels. There are two main types of logical channels - traffic channels which carry call data, and control channels which communicate service information. Control channels include broadcast channels which transmit cell-wide information, common channels used for paging and access procedures, and dedicated channels for signaling during calls or when not on a call. Logical channels are mapped onto physical channels to effectively transmit information wirelessly between network components in a GSM system. multiple access techniques used in wireless communication
multiple access techniques used in wireless communication Sajid ali
This document discusses multiple access techniques for wireless communication. It describes frequency division duplexing (FDD) and time division duplexing (TDD) for sharing radio spectrum. The main multiple access techniques are described as frequency division multiple access (FDMA), time division multiple access (TDMA), and code division multiple access (CDMA). FDMA allocates different frequency bands to each user, TDMA divides the available time into time slots and allocates one slot per user, and CDMA uses pseudo-random codes to distinguish users transmitting simultaneously on the same frequency. Common cellular systems like AMPS, GSM, and IS-95 are cited as examples. TDMA, FDMA, CDMA
TDMA, FDMA, CDMA Keerthana Nambiar
Definition, Operation, general specification, advantages, disadvantages and applications of TDMA,FDMA and CDMA. Designing 5G NR (New Radio)
Designing 5G NR (New Radio) Qualcomm Research
What is 5G NR all about? Check out this presentation to see all the key design components of this new unifying air interface for the next decade and beyond. EC8702 adhoc and wireless sensor networks iv ece
EC8702 adhoc and wireless sensor networks iv ece GOWTHAMMS6
This document outlines the syllabus for a course on Adhoc and Wireless Sensor Networks. It covers five units: (1) Introduction to Adhoc Networks and routing protocols, (2) Introduction to sensor networks and architectures, (3) Networking concepts and protocols for sensor networks, (4) Security issues in sensor networks, and (5) Sensor network platforms and tools. Some key topics discussed include characteristics of adhoc networks, challenges in routing, components and applications of wireless sensor networks, and medium access schemes. The objectives are for students to learn the fundamentals and apply their knowledge to identify suitable protocols based on network requirements and understand security and transport layer issues in these networks. Wcdma Overview Presentation
Wcdma Overview Presentation Amir Malik
WCDMA provides voice, data and video services at speeds ranging from 12.8kbps to 4.5Mbps using QPSK modulation over a 5MHz bandwidth. It uses a spread spectrum technique with wide bandwidth and supports ATM, IP and TDM access media. WCDMA introduces nodes like RNC, RBS and uses interfaces like Iu-CS, Iu-PS and Uu. It employs a Rake receiver and supports softer and soft handovers between nodes. 01 principles of the wcdma system
01 principles of the wcdma system khurrambilal01
The document discusses the principles and technical features of WCDMA, including an overview of CDMA technology, how it uses spreading codes to allow multiple users to transmit over the same frequency band simultaneously, and its use of techniques like channel coding, interleaving, and rake receivers to improve performance in multipath environments.More Related Content
What's hot
Chap 4 (large scale propagation)
Chap 4 (large scale propagation) asadkhan1327
This document discusses mobile radio propagation and propagation models. It begins by introducing how radio channels are random and time-varying. It then covers the free space propagation model and how received power decreases with distance. Reflection, diffraction, and scattering are described as the main propagation mechanisms. The two-ray ground reflection model is presented to model propagation over large distances. Diffraction is explained using the knife-edge diffraction model. Fresnel zones and diffraction gain are also defined. DWDM Presentation
DWDM Presentation ayodejieasy
This document provides an overview of Dense Wavelength Division Multiplexing (DWDM) technology. It discusses key topics such as optical transmission, DWDM components like multiplexers/demultiplexers and amplifiers, DWDM networks and topologies, and transmission quality parameters. The presentation contains 32 slides and is intended to briefly explain DWDM as a means of achieving effective fiber-optic transmission and increasing bandwidth. Gsm channels concept
Gsm channels concept Telebeansolutions
GSM uses frequency division duplexing with carriers separated by 200 kHz. Each carrier is divided into 8 time slots using TDMA. Logical channels like traffic channels and signaling channels are mapped onto these physical time slots. Traffic channels carry user data at either full rate or half rate, while signaling channels include broadcast, common, and dedicated control channels used for functions like synchronization, paging, call setup, and handover. Diversity techniques presentation material
Diversity techniques presentation material Nini Lashari
This document discusses various diversity techniques used in wireless communications to combat fading. It describes types of diversity including time, frequency, multiuser, and space diversity. It also outlines combining techniques such as selection combining, maximal ratio combining and equal gain combining that are used to improve the signal by combining signals from multiple diversity branches. The document concludes by discussing multiple input multiple output (MIMO) systems and orthogonal frequency division multiple access (OFDMA) schemes that exploit diversity and multiuser diversity. 02 umts network architecturenew
02 umts network architecturenew sivakumar D
This document provides an overview of UMTS network architecture and components. It describes the key elements of the UMTS Release 99 core network, including the circuit switched and packet switched domains. It also discusses the radio access network (UTRAN) and its components such as the radio network controller (RNC) and Node B. Finally, it summarizes the functions of the mobile switching center (MSC) and media gateway (MGW) in the UMTS network. Gprs architecture
Gprs architecture DeekshithaReddy23
GPRS Architecture and its components are covered extensively.
The slides give a little information about gprs and also gets into deeper explanation of its architecture. Ofdma
Ofdma fazida76
Orthogonal Frequency Division Multiple Access (OFDMA) is a multiple access technique that uses OFDM and FDMA. It divides the available bandwidth into multiple orthogonal subcarriers, assigning subsets of subcarriers to individual users. This allows for efficient use of spectrum and multi-user diversity. OFDMA provides better performance in fading environments compared to CDMA. However, it suffers from high peak-to-average power ratio and requires tight synchronization between users. OFDMA is used in wireless standards like WiMax due to its ability to support high data rates and combat intersymbol interference. WDM & Optical Amplifiers
WDM & Optical Amplifiers Eng_Ahmad
This document provides an overview of wavelength division multiplexing (WDM) technology. It begins with introducing optical fibers and their components. It then discusses multiplexing techniques like time-division multiplexing (TDM) and frequency-division multiplexing (FDM). The document focuses on WDM, defining it as a technology that multiplexes multiple optical signals on a single fiber using different laser light wavelengths. It describes dense WDM (DWDM) and coarse WDM (CWDM), and compares their wavelength spacing and applications. The document also outlines optical amplifiers like erbium-doped fiber amplifiers and their uses. In conclusion, it states that WDM enables high-speed, high-capacity data transmission and Lte Tutorial
Lte Tutorial Pengpeng Song
LTE was developed to meet increasing demands for mobile data traffic by improving key metrics like latency, throughput, capacity and coverage compared to HSPA. It features flexible bandwidths up to 20MHz, simplified network architecture, advanced antenna techniques and OFDMA/SC-FDMA based access for downlink and uplink respectively. LTE supports peak rates of 300Mbps downlink and 75Mbps uplink depending on UE category and bandwidth. It adopts an all-IP flat architecture with simplified all-packet based transmission procedures. Presentation on CDMA
Presentation on CDMA Shuvangkar Dhar
CDMA stands for Code Division Multiple Access. It is a digital wireless communication technology that allows multiple users to access a single channel using unique code assignments. CDMA has evolved through standards like IS-95, CDMA2000, and WCDMA. It provides benefits like increased capacity, soft handoffs, and lower power consumption compared to other technologies. While CDMA has advantages, it also faces challenges like higher licensing costs and reduced coverage area with increasing subscriber loads. Overall, CDMA remains an effective multiple access technique for wireless communications. Wimax ppt
Wimax ppt OECLIB Odisha Electronics Control Library
This document summarizes a seminar presentation on WiMAX technology. It describes WiMAX as a wireless broadband technology based on the IEEE 802.16 standard that can provide internet access within a range of up to 31 miles. Key points covered include the basic components of a WiMAX system including towers and receivers, how WiMAX connections work, advantages over other technologies like speed and lack of wired infrastructure, and future applications like integrated laptop access. Issues discussed are the challenges of network deployment and lower costs compared to 3G mobile networks. Gsm.....ppt
Gsm.....ppt balu008
Global System for Mobile (GSM) is a second generation cellular standard developed for voice services and data delivery using digital modulation. It has a network subsystem including components like the MSC, HLR, VLR, and AuC that handle call processing and subscriber information. The radio subsystem consists of BSCs controlling multiple BTSs to manage radio network access. GSM provides international roaming, high quality voice calls, and supports data services like SMS and fax in addition to voice. Wireless Local Loop
Wireless Local Loop Sri Manakula Vinayagar Engineering College
Wireless local loop (WLL) provides wireless connections for stationary users as an alternative to wired connections. It targets the "last mile" between a neighborhood access point and end users. Key advantages include lower installation costs than wiring due to reduced digging and infrastructure requirements, as well as rapid deployment. WLL systems face challenges around spectrum licensing, maintaining wireline-level service quality, and planning networks to achieve high penetration levels while supporting limited user mobility within coverage areas. Common WLL technologies include cellular, satellite, and fixed wireless access using licensed or unlicensed spectrum. Chapter 7 multiple access techniques
Chapter 7 multiple access techniques Kaushal Kabra
Multiple access techniques allow multiple users to share finite radio spectrum resources simultaneously. They can be categorized as narrowband or wideband. Common techniques include FDMA, TDMA, CDMA, and SDMA. FDMA divides the total bandwidth into narrow channels that are allocated to users. TDMA divides each channel into time slots that are allocated to users. CDMA spreads the signal over a wide bandwidth using pseudo-random codes and allows multiple signals to overlap in both time and frequency. Umts system architecture
Umts system architecture Midhun S
Universal Mobile Telecommunications System (UMTS) a 3G cellular system for networks based on the GSM standard. GSM channels
GSM channels Mohd Nazir Shakeel
Physical channels carry information over the air interface between the mobile station and base transceiver station. Logical channels map user data and signaling information onto physical channels. There are two main types of logical channels - traffic channels which carry call data, and control channels which communicate service information. Control channels include broadcast channels which transmit cell-wide information, common channels used for paging and access procedures, and dedicated channels for signaling during calls or when not on a call. Logical channels are mapped onto physical channels to effectively transmit information wirelessly between network components in a GSM system. multiple access techniques used in wireless communication
multiple access techniques used in wireless communication Sajid ali
This document discusses multiple access techniques for wireless communication. It describes frequency division duplexing (FDD) and time division duplexing (TDD) for sharing radio spectrum. The main multiple access techniques are described as frequency division multiple access (FDMA), time division multiple access (TDMA), and code division multiple access (CDMA). FDMA allocates different frequency bands to each user, TDMA divides the available time into time slots and allocates one slot per user, and CDMA uses pseudo-random codes to distinguish users transmitting simultaneously on the same frequency. Common cellular systems like AMPS, GSM, and IS-95 are cited as examples. TDMA, FDMA, CDMA
TDMA, FDMA, CDMA Keerthana Nambiar
Definition, Operation, general specification, advantages, disadvantages and applications of TDMA,FDMA and CDMA. Designing 5G NR (New Radio)
Designing 5G NR (New Radio) Qualcomm Research
What is 5G NR all about? Check out this presentation to see all the key design components of this new unifying air interface for the next decade and beyond. EC8702 adhoc and wireless sensor networks iv ece
EC8702 adhoc and wireless sensor networks iv ece GOWTHAMMS6
This document outlines the syllabus for a course on Adhoc and Wireless Sensor Networks. It covers five units: (1) Introduction to Adhoc Networks and routing protocols, (2) Introduction to sensor networks and architectures, (3) Networking concepts and protocols for sensor networks, (4) Security issues in sensor networks, and (5) Sensor network platforms and tools. Some key topics discussed include characteristics of adhoc networks, challenges in routing, components and applications of wireless sensor networks, and medium access schemes. The objectives are for students to learn the fundamentals and apply their knowledge to identify suitable protocols based on network requirements and understand security and transport layer issues in these networks.What's hot (20)
Chap 4 (large scale propagation)
Chap 4 (large scale propagation)
DWDM Presentation
DWDM Presentation
Gsm channels concept
Gsm channels concept
Diversity techniques presentation material
Diversity techniques presentation material
02 umts network architecturenew
02 umts network architecturenew
Gprs architecture
Gprs architecture
Ofdma
Ofdma
WDM & Optical Amplifiers
WDM & Optical Amplifiers
Lte Tutorial
Lte Tutorial
Presentation on CDMA
Presentation on CDMA
Wimax ppt
Wimax ppt
Gsm.....ppt
Gsm.....ppt
Wireless Local Loop
Wireless Local Loop
Chapter 7 multiple access techniques
Chapter 7 multiple access techniques
Umts system architecture
Umts system architecture
GSM channels
GSM channels
multiple access techniques used in wireless communication
multiple access techniques used in wireless communication
TDMA, FDMA, CDMA
TDMA, FDMA, CDMA
Designing 5G NR (New Radio)
Designing 5G NR (New Radio)
EC8702 adhoc and wireless sensor networks iv ece
EC8702 adhoc and wireless sensor networks iv ece
Viewers also liked
Wcdma Overview Presentation
Wcdma Overview Presentation Amir Malik
WCDMA provides voice, data and video services at speeds ranging from 12.8kbps to 4.5Mbps using QPSK modulation over a 5MHz bandwidth. It uses a spread spectrum technique with wide bandwidth and supports ATM, IP and TDM access media. WCDMA introduces nodes like RNC, RBS and uses interfaces like Iu-CS, Iu-PS and Uu. It employs a Rake receiver and supports softer and soft handovers between nodes. 01 principles of the wcdma system
01 principles of the wcdma system khurrambilal01
The document discusses the principles and technical features of WCDMA, including an overview of CDMA technology, how it uses spreading codes to allow multiple users to transmit over the same frequency band simultaneously, and its use of techniques like channel coding, interleaving, and rake receivers to improve performance in multipath environments. Wcdma presentation4
Wcdma presentation4 Mohammad Kaleem
The document discusses different methods for establishing channels in radio technologies: FDMA uses different frequencies for each user; TDMA uses different time slots on the same frequency; W-CDMA uses unique code patterns to distinguish each user on the same frequency. It also describes the UMTS frame format and power control mechanisms in UMTS, including inner loop power control which adjusts transmission power based on comparisons to Eb/Nt objectives, and outer loop power control which estimates Eb/Nt objectives based on measured frame error rates. WCDMA Air Interface
WCDMA Air Interface Sujeet Kumar
This presentation discusses about the WCDMA air Interface used in 3G i.e. UMTS. This Radio Interface has great capability on which Third Generation of Mobile Communication is built, with backward compatibility. 1 tmo18023 umts overview
1 tmo18023 umts overview DhairYash Kotwani
The document provides an overview of advanced wireless networks and UMTS. It discusses the evolution from 2G to 3G networks, including the limitations of 2G and requirements for 3G. It describes the UMTS architecture, including the UTRAN, core network, and protocols on the Iu interface. It also covers basic UMTS principles such as CDMA techniques, radio resources including frequency, time, and power/code, and radio resource management. Wcdma
Wcdma บอย วีระ
The document provides details on WCDMA, including:
- WCDMA has two modes - FDD and TDD, characterized by duplex method. The chip rate is 3.84 Mcps.
- Spreading factors range from 256 to 4 in the uplink and from 512 to 4 in the downlink, allowing variable symbol rates. OVSF codes are used for channelization and Gold codes are used for cell/user separation.
- Modulation is QPSK. Carrier spacing can vary from 4.2 to 5.4 MHz. Larger spacing is used between operators to avoid interference. WCDMA OverView
WCDMA OverView Md Joynal Abaden
The UTRAN architecture consists of radio network controllers (RNCs) and Node B base stations. The RNC controls radio resources like scheduling and handovers in its domain, while the Node B handles measurements and power control. UTRAN uses soft handovers between Node Bs to provide diversity gains and improve coverage and capacity. Power control operates at 1500Hz to control transmit power and mitigate fading. 3G basic good
3G basic good Jit Pal Dhanjal
This document provides a rough guide to understanding 3G/HSPA concepts for RF engineers. It begins with general information on 3G networks and UMTS. It then discusses technical concepts such as spreading codes, scrambling codes, and processing gain. It explains how spreading spreads the baseband signal over the frequency band and hides it below the noise floor, allowing recovery via despreading. The document also covers HSPA technologies and their advantages over prior 3G standards. Wcdma channels
Wcdma channels Manish Srivastava
WCDMA uses an OSI model with 7 layers. The lower 3 layers - physical, data link, and network layers - are most important for WCDMA. The physical layer uses different physical channels to transmit data over the air interface. Logical channels define how data is transferred, transport channels define how data is transmitted, and physical channels carry payload data and define signal characteristics. There are three types of channels - logical, transport, and physical - that work together to transmit various types of control and traffic data between the UE and base station. ไฟฟ้า
ไฟฟ้า metinee
A Simulation of Wideband CDMA System on Digital Up/Down Converters
A Simulation of Wideband CDMA System on Digital Up/Down Converters Editor IJMTER
In this paper, I present FPGA implementation of a digital down converter (DDC) and
digital up converter (DUC) for a single carrier WCDMA system. The DDC and DUC is complex in
nature. The implementation of DDC is simple because it does not require mixers or filters. Xilinx
System Generator and Xilinx ISE are used to develop the hardware circuit for the FPGA. Both the
circuits are verified on the Spartan - 3 FPGA Wcdmaphysicallayer 111120031701-phpapp02
Wcdmaphysicallayer 111120031701-phpapp02 Terra Sacrifice
This document outlines the WCDMA physical layer design. It discusses the WCDMA network architecture and physical layer in detail. Specifically, it describes the uplink and downlink physical channels, transport channels, logical channels, spreading techniques, channelization codes, scrambling codes, and frame structure used in WCDMA. It provides information on uplink and downlink dedicated and common physical channels, and the various coding, modulation, and multiplexing schemes used in the WCDMA physical layer. R4 3DS 9.8.0 update
R4 3DS 9.8.0 update Sam Palpito
The document discusses firmware updates for several R4 3DS flashcarts that allow them to be compatible with the latest Nintendo 3DS system updates up to version 9.8.0. It provides download links for the updated firmware for the R4 3DS Dual Core, R4 3DS RTS, and red box R4 3DS cards on their website. It also describes new features of the Dual Core firmware, recommendations for emulators to use with R4 3DS cards, and instructions for setting up the flashcarts if the 3DS system has already been updated. Cdma me
Cdma me surabhisushant
This document discusses Code Division Multiple Access (CDMA) technology. It explains that CDMA uses spread spectrum technology with pseudo-noise codes and correlation calculations to allow greater capacity and data rates. It then describes the key elements of spread spectrum communication and the three methods of spreading bandwidth. The document provides details on CDMA standards over multiple generations including CDMAOne, CDMA2000, W-CDMA, CDMA EV-DO and WCDMA. It discusses the benefits of CDMA including greater capacity, resistance to interference, and secure communications through use of spreading codes. WCDMA
WCDMA Abidur Rahman
WCDMA (Wideband Code Division Multiple Access), also known as UMTS, is a 3G cellular technology that uses CDMA with a bandwidth of 5MHz. It offers greater spectral efficiency and bandwidth than previous standards. Key features include high spectral efficiency through frequency multiplexing, soft capacity control through variable transmission power, and compatibility with GSM networks. WCDMA differs from earlier CDMA standards by using a wider bandwidth and supporting both circuit-switched and packet-switched networks for data and voice. 3G TECHNOLOGY
3G TECHNOLOGY Vinayaka Karanth
3G technology allows for higher call volumes, faster streaming media and supports multimedia applications like video calling, email and games. It provides data speeds up to 2Mbps, enabling video calling on mobile devices. While 3G improves bandwidth capabilities, further advances are still needed to realize its full potential for new mobile applications in the future. Blu ray
Blu ray Goa App
Blu-Ray is the next generation optical disc format that uses blue-violet lasers and has higher storage capacity than DVDs. It can store up to 50GB of data, allowing for high definition video and audio. Blu-Ray discs have a hard coating that makes them more durable and resistant to fingerprints and scratches compared to DVDs. They also have faster data transfer rates and can playback DVDs, giving them an advantage in storage, quality, and compatibility over prior disc formats. Evolution Of HSPA
Evolution Of HSPA Pengpeng Song
HSPA evolution involves several new features to increase data rates:
1) MIMO (2x2) using spatial multiplexing allows two independent data streams to increase throughput.
2) Higher order modulations like 64QAM for downlink and 16QAM for uplink allow more bits per symbol.
3) Layer 2 enhancements like flexible RLC PDU sizes and MAC-ehs header format allow higher data rates to be supported. Blu ray technology
Blu ray technology Govind Raj
This document provides an overview of Blu-ray technology. It discusses that Blu-ray uses a blue laser and thinner disc structure to achieve over 5 times the storage capacity of DVDs, allowing for recording of high definition video. The format was developed by a consortium of electronics companies and supports playback of full length HD movies. Blu-ray has higher manufacturing costs than DVD initially but production costs are expected to decrease over time as the technology matures. It will likely replace DVD and provide the standard for high definition video storage going forward. Wcdma physical layer
Wcdma physical layer rajibratan
The document discusses the physical layer design of WCDMA networks. It provides an overview of WCDMA network architecture and the UMTS network model. It then describes the physical channels, transport formats, channel coding, spreading techniques and code types used in the WCDMA uplink and downlink. Key aspects covered include dedicated and common physical channels, orthogonal variable spreading factor channelization codes, scrambling codes, and transport block sets.Viewers also liked (20)
Wcdma Overview Presentation
Wcdma Overview Presentation
01 principles of the wcdma system
01 principles of the wcdma system
Wcdma presentation4
Wcdma presentation4
WCDMA Air Interface
WCDMA Air Interface
1 tmo18023 umts overview
1 tmo18023 umts overview
Wcdma
Wcdma
WCDMA OverView
WCDMA OverView
3G basic good
3G basic good
Wcdma channels
Wcdma channels
ไฟฟ้า
ไฟฟ้า
A Simulation of Wideband CDMA System on Digital Up/Down Converters
A Simulation of Wideband CDMA System on Digital Up/Down Converters
Wcdmaphysicallayer 111120031701-phpapp02
Wcdmaphysicallayer 111120031701-phpapp02
R4 3DS 9.8.0 update
R4 3DS 9.8.0 update
Cdma me
Cdma me
WCDMA
WCDMA
3G TECHNOLOGY
3G TECHNOLOGY
Blu ray
Blu ray
Evolution Of HSPA
Evolution Of HSPA
Blu ray technology
Blu ray technology
Wcdma physical layer
Wcdma physical layer
Similar to Wcdma
Ann
Ann Sajan Sahu
The technical seminar presentation discusses applications of artificial neural networks (ANNs) in microwave engineering. Specifically, it covers how ANNs can be used to model smart antenna systems and the resonant frequency of rectangular patch antennas. It also discusses using ANNs for the demand node concept in radio network analysis and optimization. The presentation provides details on ANN modeling approaches, network parameters, initialization and selection algorithms, adaptation, and optimization techniques. Installation & Commisioning References that ICT TELECOM achieved
Installation & Commisioning References that ICT TELECOM achieved tolgagurleyen
This document provides summaries of various satellite communication projects completed between 2002-2012 by ICT, a Turkish satellite communications company. It lists earth station installations, antenna relocations, and technical services provided to customers such as Turksat and Digiturk. ICT's services include installation, testing, maintenance, repairs, training and 24/7 technical support. The company has expertise in various satellite communication technologies and manufacturers. proposal last.potx
proposal last.potx ABDULJABBARALSHARIF1
The document proposes a research study on evaluating the quality of service (QoS) performance of Long-Term Evolution Advanced (LTE-A) networks for Internet Protocol Television (IPTV). The study would use simulation tools to ensure the best viewing experience for users. Over a period of 2 years, the research plan includes a literature review, practical implementation, publication of papers, and thesis writing in chapters. The goal is to analyze QoS parameters for resource allocation that can guarantee quality for sensitive video services on 4G networks. Asynchronous transfer mode (atm)
Asynchronous transfer mode (atm) Sajan Sahu
The document is a seminar report on Asynchronous Transfer Mode (ATM) that was presented by Sangram Sekhar Choudhuri. It discusses ATM as a high-performance, cell-oriented switching and multiplexing technology that utilizes fixed-length packets to efficiently carry different types of traffic, helping with multimedia and networking applications. The report covers an introduction to ATM, its benefits, components like the cell header format, reference model, and address format. It also discusses ATM service classes, technical parameters, standards, data insertion schemes, applications for voice, video and networking traffic management, and concludes that ATM provides a reliable, scalable transport system needed for future networks. Framework for Delivering IPTV Services over Satellite Networks
Framework for Delivering IPTV Services over Satellite Networks AJAL A J
Framework for Delivering IPTV Services over
Satellite Networks
Home Network
Access Network (AN)
IP based Core Network (IPCN)
Video Head End (VHE)
Satellite Link
Flying ad hoc network
Flying ad hoc network Binayakreddy
FANETs have become an emerging research field, which consists of a group of small UAVs connected in ad-hoc mode. Such networks are distinguished by a high mobility, frequent topology changes and 3D-space movement of the nodes, which constitutes networking issues. To overcome such kind of issues, choosing an appropriate communication architecture and reliable routing protocols are mandatory to authenticate robust communication between the UAVs.
khaled Al-Zoubi
khaled Al-Zoubi Khaled Al-Zoubi
Khaled AL-Zoubi is a network consultant engineer with over 20 years of experience working with optical networking equipment from Cisco, Nokia Siemens, and Huawei. He has extensive experience designing, implementing, and supporting DWDM, SDH, IP, and packet optical networks. Currently, he works as a network consultant engineer for Cisco in Saudi Arabia, where he provides technical support and designs optical networks. EC8072 UNIT V .pptx
EC8072 UNIT V .pptx ponni2
This document provides information about electromagnetic interference (EMI) measurements and standards. It discusses EMI test facilities like shielded chambers, open area test sites, and EMI receivers and spectrum analyzers used for testing. It also covers various EMI standards from organizations like CISPR, FCC, IEC, EN, and MIL for both civilian and military applications. Measurement methods for radiated and conducted emissions are described. CIC Backhaul Development Short 3 9 2010
CIC Backhaul Development Short 3 9 2010 CIC
CIC provides professional services to help companies locate fiber, design microwave networks, simplify Ethernet deployment, and perform financial analysis for broadband and backhaul projects. Their solutions include centralized fiber databases, automated microwave design software, tools to integrate fixed and wireless networks, and financial models. CIC has experience with over 16,000 sites across 65 markets for wireless carriers and has the engineering and installation capacity for thousands of sites per year. Network-based Wireless for Remote Monitoring Lead-Acid Battery
Network-based Wireless for Remote Monitoring Lead-Acid Battery Oka Danil
This document presents a network-based wireless system for remotely monitoring lead acid batteries. It introduces the proposed scheme which uses IP networks to monitor batteries in real-time and securely from mobile or fixed systems. The system collects data from batteries using I2C, ADC and UART protocols, frames it for transmission, and sends it periodically over Wi-Fi networks. Experimental results demonstrate proof-of-concept and the authors conclude it is a new dedicated monitoring system, while future work involves integrating an Android GUI and industry testing. 2012 Moxa Brazil Channel Partner's Workshop_Vertical Market Solutions_0424201...
2012 Moxa Brazil Channel Partner's Workshop_Vertical Market Solutions_0424201... Eric Lo
The document outlines the agenda for Moxa Brazil's 2012 Channel Partner's Workshop, which will take place on April 25th and 26th. On the second day, topics will include Moxa's industrial Ethernet and edge-to-core solutions, vertical market strategies and case studies in power automation and transportation, and collaboration models for the power automation market. Presentations will provide overviews of Moxa's solutions for substation automation using IEC 61850 and IEEE 1588 standards, as well as its product portfolio for transmission and distribution networks. 5G Technology
5G Technology Saurabh Nambiar
1) 5G wireless technology will offer data transfer speeds up to 1 terabit per second, providing connectivity to support applications like virtual reality.
2) It is the next generation of mobile networks that will succeed 4G LTE, offering faster speeds, higher bandwidth, and lower latency.
3) 5G networks will use new radio access technologies and a simplified flat IP-based core network to efficiently support a variety of services. Analysis Of 802.16d By Irfan Anees
Analysis Of 802.16d By Irfan Anees IEEEP Karachi
This document analyzes the 802.16d standard for WiMAX using 256 sub carriers through orthogonal frequency division multiplexing (OFDM) technique. Simulations were conducted to analyze signal characteristics, losses, generation, transmission, and reception using OFDM. The results show the advantages of 256 sub carriers are maximum bandwidth but it limits bandwidth compared to 2048 sub carriers OFDMA. WiMAX selected OFDM with 256 FFT over OFDMA with 2048 FFT for the 802.16d physical layer. Dish position control using Geared Motor
Dish position control using Geared Motor Laxmikanth Kolukula
By using remote control we can reduce the complexity of positioning of antenna using Infrared means according to the strength of the signal. My project
My project Shaik Suhail
This document describes a project to develop a detection and warning system for fireworks warehouses using wireless sensor networks. The system will detect fires using sensors and send alerts via GSM. It will be implemented using a microcontroller, fire sensor, GSM module, LCD display, relay switch and other hardware. The microcontroller will monitor the sensor for fire detection and control the relay switch to activate a water sprinkler. It will also send alerts to registered mobile numbers via the GSM module. The project aims to provide fire safety and security in industrial warehouses. Cn fundamentals of networks
Cn fundamentals of networks Aravindh Saivaraju
The document summarizes a video lecture on fundamental computer networks given by Assistant Professor S.Aravindh. It discusses key topics like defining networks, types of networks including LAN and MAN, requirements for networks involving senders, receivers, media, protocols and messages. It also covers network topologies, modes of communication, network devices, connectivity devices, firewalls and applications of networks like resource sharing, information sharing and communication. Digital Twin-based Software-defined UAV Networks Using Queuing Model
Digital Twin-based Software-defined UAV Networks Using Queuing Model abir641
In order to deploy unmanned aerial vehicles (UAVs) in a variety of scenarios and to ensure the performance, reliability, and safety of these systems, a flexible and adaptable core network infrastructure is required. In this regard, a software-defined network (SDN), allows centralized control and coordination using software rather than traditional hardware-based controllers for the operation of UAVs to provide a flexible and scalable platform. On the other hand, digital twin (DT) technology has the potential which can provide real-time monitoring, analysis, and virtualization of network performance with rapid prototyping and testing to revolutionize the way that software-defined UAV networks are designed, implemented, and maintained. Therefore, in this paper, DT integrated approach for software-defined UAV networks is proposed with a routing flow adjustment algorithm. We also demonstrate its capability through the M/M/1 queueing model. Results have shown that our proposal outperforms typical queueing models without the integration of SDN and DT in terms of efficiency, reliability, and agility of UAV networks and provides visualized network analyzing platform with a real-time monitoring feature. Dwdm cisco
Dwdm cisco Stas Shilkrut
This document introduces dense wavelength division multiplexing (DWDM) technology. It discusses how DWDM addresses the need for increased bandwidth in metropolitan area networks (MANs) driven by economic forces such as the exponential growth of data traffic and bandwidth demand. DWDM provides advantages over traditional time-division multiplexing (TDM) by allowing multiple optical carrier signals to be transmitted simultaneously over the same fiber. This significantly increases fiber capacity and enhances performance and reliability for MAN applications. Proposal Presentation 2
Proposal Presentation 2 Ikeh Guru Chibuzo
This document proposes a project to design an advanced signal disrupting device with an LCD display. The device aims to block transmission signals by creating interference with undedicated signal frequencies. It will function as both a radio frequency jammer and GSM jammer, blocking commercial FM radio bands and GSM signals. The system design will include power supply, intermediate frequency, radio frequency, and antenna blocks to disrupt signals. It will use a microcontroller and LCD display to indicate jamming of signals using radio waves. The project aims to block mobile phone signals within a range of 850MHz to 2170MHz frequencies for security applications. 802.11ac
802.11ac yousef emami
This document is a presentation on 802.11ac that:
1) Explains that 802.11ac provides wireless networking speeds commensurate with gigabit ethernet by using wider channel bandwidths and more advanced modulation techniques.
2) Compares 802.11ac to 802.11n in terms of modulation coding sets and channel bandwidths.
3) Discusses how 802.11ac utilizes multi-user MIMO to allow access points to communicate with multiple clients simultaneously, improving spatial reuse.Similar to Wcdma (20)
Ann
Ann
Installation & Commisioning References that ICT TELECOM achieved
Installation & Commisioning References that ICT TELECOM achieved
proposal last.potx
proposal last.potx
Asynchronous transfer mode (atm)
Asynchronous transfer mode (atm)
Framework for Delivering IPTV Services over Satellite Networks
Framework for Delivering IPTV Services over Satellite Networks
Flying ad hoc network
Flying ad hoc network
khaled Al-Zoubi
khaled Al-Zoubi
EC8072 UNIT V .pptx
EC8072 UNIT V .pptx
CIC Backhaul Development Short 3 9 2010
CIC Backhaul Development Short 3 9 2010
Network-based Wireless for Remote Monitoring Lead-Acid Battery
Network-based Wireless for Remote Monitoring Lead-Acid Battery
2012 Moxa Brazil Channel Partner's Workshop_Vertical Market Solutions_0424201...
2012 Moxa Brazil Channel Partner's Workshop_Vertical Market Solutions_0424201...
5G Technology
5G Technology
Analysis Of 802.16d By Irfan Anees
Analysis Of 802.16d By Irfan Anees
Dish position control using Geared Motor
Dish position control using Geared Motor
My project
My project
Cn fundamentals of networks
Cn fundamentals of networks
Digital Twin-based Software-defined UAV Networks Using Queuing Model
Digital Twin-based Software-defined UAV Networks Using Queuing Model
Dwdm cisco
Dwdm cisco
Proposal Presentation 2
Proposal Presentation 2
802.11ac
802.11ac
More from Sajan Sahu
Architecture of message oriented middleware
Architecture of message oriented middleware Sajan Sahu
The document discusses message oriented middleware (MOM) and compares implementations of MOM including JMS, MSMQ, and MQSeries. MOM facilitates asynchronous messaging between applications and components. JMS is part of Java and supports publish/subscribe and point-to-point messaging. MSMQ by Microsoft uses queues managed by queue managers. MQSeries by IBM refers to queues, queue managers, and channels as objects and shows how they interact in its architecture. Insurance envoy
Insurance envoy Sajan Sahu
The document describes an insurance envoy project completed between December 2006 and March 2007. The project involved developing an intranet-based web application to help insurance companies streamline their policy and claims processes. The system has 7 modules and was designed to speed up workflows, increase accuracy and customer satisfaction, and make information retrieval easier. It provides secure, centralized access to customer, broker, policy and company data. The system was tested using black box and white box techniques at the unit, integration and system levels. Computer’s memory
Computer’s memory Sajan Sahu
The document summarizes different types of computer memory. It discusses primary memory, which includes RAM and ROM that the computer uses to process data. RAM allows for immediate data manipulation and storage of currently running processes, programs, and data. ROM stores startup instructions and can only be written to once. Secondary memory includes magnetic tape, disks, and optical disks, which provide larger backup storage. Magnetic tape uses magnetic coating to store data segments while magnetic disks offer direct access and high storage capacity. Optical disks use reflective coatings read by lasers to store large amounts of data in small spaces. Automated inspection of aircraft
Automated inspection of aircraft Sajan Sahu
Bikram Kumar Mishra presented on developing robotic tools to assist in automated aircraft inspection. The presentation covered establishing technical feasibility, developing robotic systems with mechanical, control, and sensor systems, and final phase development including eddy current sensors for inspection and video cameras for navigation. The goal was to create a robot that can walk over an aircraft, perform inspections identical to manual methods, and be remotely operated using sensor feedback to the inspector. Data compretion
Data compretion Sajan Sahu
This document discusses data compression techniques. It begins with an introduction to data compression, explaining that it reduces file sizes by identifying repetitive patterns in data. It then discusses some common questions around data compression, its major steps, types including lossless and lossy compression, and some examples like Huffman coding and LZ-77 encoding. The document provides details on these techniques through examples and diagrams. Deadlock
Deadlock Sajan Sahu
This document discusses deadlocks in operating systems. It defines deadlock as when multiple processes are waiting for resources held by each other in a cyclic manner, resulting in none of the processes making progress. It provides examples and describes the four necessary conditions for deadlock to occur: mutual exclusion, hold and wait, no preemption, and circular wait. It also discusses methods for handling deadlocks, including prevention, avoidance, and recovery techniques like terminating processes or preempting resources. Data warehouseing
Data warehouseing Sajan Sahu
The document discusses a seminar on data warehousing presented by Sangram Keshari Swain. It defines a data warehouse as a subject-oriented, integrated, non-volatile collection of data used to support management decision making. The primary concept is separating nonvolatile data for analysis from operational systems. A data warehouse provides a single view of enterprise data optimized for reporting and analysis through extracting and integrating data from different sources. Information system
Information system Sajan Sahu
The document discusses the various phases of information system development including problem recognition, planning, feasibility study, user specifications, system design, design of output and input systems, and processing design. It notes that problem recognition can come from dissatisfaction with existing systems, management directives, or requests for new systems. The planning phase includes assessing corporate culture and priority criteria. The feasibility study consists of organizing the study, searching for solutions, performing feasibility analysis, and choosing a solution. User specifications involve data collection, analysis, and creating requirements documentation. System design includes modeling, methodology selection, and documentation. Output design covers categories, media, equipment, and principles. Input design discusses data collection, preparation, offline and online entry, validation, and human factors Dna computing
Dna computing Sajan Sahu
The document discusses DNA computing and its advantages over traditional computers. It begins with an introduction by Debadarshi Mishra on the topic. DNA computers use enzymes that react with DNA strands in a chain reaction to perform computations in parallel, unlike traditional computers that use binary. DNA computers are smaller, faster, and can solve problems with many possible solutions simultaneously. Their potential applications include monitoring health and generating customized drugs. While still in development, DNA computing represents a new approach to computation at the molecular level. Wireless application protocol (WAP)
Wireless application protocol (WAP) Sajan Sahu
This presentation introduces the Wireless Application Protocol (WAP). WAP was created by mobile companies to provide an open standard for wireless information and services. It uses WML as its markup language. The presentation describes WAP's architecture including its protocol stack and WAP gateway. It also discusses how WAP addresses limitations of wireless devices and networks, such as small displays and low bandwidth. Examples of WAP services mentioned include banking, shopping, news and email. In conclusion, the presenter notes that WAP will become more efficient with the rollout of 3G networks like UMTS. Blink detection and tracking of eyes for eye localisat
Blink detection and tracking of eyes for eye localisat Sajan Sahu
This document presents a method for blink detection, eye tracking, and eye localization. It proposes using frame differencing, thresholding, and optical flow analysis to detect eye blinks. Key steps include obtaining motion regions through frame differencing, thresholding to find eye blobs, and computing optical flow fields to determine if dominant blob motion is upward or downward, indicating eye opening or closing. Eye tracking is then performed on localized eye regions using KLT tracking with 20 feature points. The method aims to accurately and quickly locate and track eyes for applications like human-computer interaction and security identification. Database system
Database system Sajan Sahu
This document discusses database management systems (DBMS) and their key characteristics and components. It covers three main points:
1) It describes the main functions of a DBMS, including maintaining data integrity, enforcing access rules, providing backup/recovery procedures, and allowing shared data access across applications.
2) It outlines different database models like relational, network, and hierarchical and discusses logical and physical data independence.
3) It explores the architecture of a DBMS and how users and programs interact with the database through a DBMS interface to perform queries, updates, and other data management tasks. GPRS
GPRS Sajan Sahu
GPRS is a packet-based mobile data service on the 2G and 3G cellular communication systems. It provides higher data transmission rates and efficient use of network resources compared to existing cellular networks. GPRS allows users to be continuously connected to the network and transfer data in bursts. It introduces packet-switched routing to the existing GSM infrastructure and supports applications like internet, email and file transfer through connections to external packet networks. Bios
Bios Sajan Sahu
The document provides information about the BIOS (Basic Input/Output System) including what it does, its components, and setup. It discusses that the BIOS performs basic functions to start the computer like checking setup information, loading drivers and interrupt handlers, and performing POST (Power-On Self-Test). It also outlines the typical boot sequence, components of the setup utility, and some beep codes used for fault finding. Bluetooth
Bluetooth Sajan Sahu
Bluetooth is a wireless technology standard that allows various digital devices to connect and exchange information over short distances without cables. It uses short-wavelength radio transmissions in the industrial, scientific and medical radio bands to facilitate connections between devices like mobile phones, headphones, laptops and printers. Key benefits of Bluetooth include its global acceptance, ability to connect a wide range of devices easily, secure connections, and low power consumption. It works by creating personal area networks between devices within about 30 feet of each other. 802.11
802.11 Sajan Sahu
The document discusses the 802.11 specifications for wireless LANs. It describes the layers and protocols in the 802.11 architecture including the LLC, MAC, PHY and management layers. It provides details on the MAC protocol which uses CSMA/CA for channel access. It also describes the different physical layer specifications including DSSS, FHSS, IR and OFDM and key aspects of the DSSS PHY standard. Erp
Erp Sajan Sahu
The document discusses the key steps for selecting and implementing an enterprise resource planning (ERP) system. It recommends establishing a major project with high priority and visibility. A project manager should be selected who is knowledgeable about the company and ERP systems. Requirements for the system should be thoroughly documented from all departments. Top candidates are reviewed through references, trial software, and selection criteria. Implementation involves training users on the system's concepts and software, establishing procedures, and maintaining data accuracy. Internet telephony
Internet telephony Sajan Sahu
This document provides an overview of internet telephony (also known as voice over internet protocol or VoIP). It discusses how VoIP works by sending audio over the internet in real-time between computer users. The document also outlines the key factors and protocols that enable VoIP, including improvements in compression techniques, full-duplex sound cards, more powerful PCs, and protocols like SIP, RTP, and H.323. Both advantages and disadvantages of VoIP are presented, such as lower long distance costs but also potential issues with internet integration and latency. Criptography
Criptography Sajan Sahu
This document provides an overview of cryptography. It discusses traditional cryptography techniques like the Caesar cipher and shift ciphers. It also explains symmetric and asymmetric key cryptography, giving examples like DES, RSA, and their uses. Cryptographic services like authentication, data integrity, non-repudiation, and confidentiality are mentioned. The document notes how cryptography is widely used today in network security, banking transactions, and military communications. Implimating counter
Implimating counter Sajan Sahu
This document discusses Counter compliance from a publisher's perspective. It explains that publishers comply with Counter to meet customer demands and demonstrate usage and value. Counter compliance means making some defined usage reports available, though not necessarily all reports. It also only currently applies to journals, not other materials. The document outlines things publishers should do like comply with Counter's Code of Practice, inform sales and customers about Counter, and prepare for future auditing and data standards.More from Sajan Sahu (20)
Architecture of message oriented middleware
Architecture of message oriented middleware
Insurance envoy
Insurance envoy
Computer’s memory
Computer’s memory
Automated inspection of aircraft
Automated inspection of aircraft
Data compretion
Data compretion
Deadlock
Deadlock
Data warehouseing
Data warehouseing
Information system
Information system
Dna computing
Dna computing
Wireless application protocol (WAP)
Wireless application protocol (WAP)
Blink detection and tracking of eyes for eye localisat
Blink detection and tracking of eyes for eye localisat
Database system
Database system
GPRS
GPRS
Bios
Bios
Bluetooth
Bluetooth
802.11
802.11
Erp
Erp
Internet telephony
Internet telephony
Criptography
Criptography
Implimating counter
Implimating counter
Recently uploaded
Project Management Semester Long Project - Acuity
Project Management Semester Long Project - Acuity jpupo2018
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts. Webinar: Designing a schema for a Data Warehouse
Webinar: Designing a schema for a Data Warehouse Federico Razzoli
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts. Skybuffer SAM4U tool for SAP license adoption
Skybuffer SAM4U tool for SAP license adoption Tatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface. GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy Tomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx MichaelKnudsen27
Slides from event Fueling AI with Great Data with Airbyte Webinar
Fueling AI with Great Data with Airbyte Webinar Zilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices Quotidiano Piemontese
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information. June Patch Tuesday
June Patch Tuesday Ivanti
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities. Artificial Intelligence for XMLDevelopment
Artificial Intelligence for XMLDevelopment Octavian Nadolu
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions. Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers akankshawande
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion. How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf Chart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
How to use Firebase Data Connect For Flutter
How to use Firebase Data Connect For Flutter Daiki Mogmet Ito
This is how to use data connect in flutter. Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays - June 2024 Jason Packer
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20 Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro... saastr
SaaStr Europa 2024 20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024 Matthew Sinclair
Everything I found interesting about the irresponsible use of machine intelligence in May 2024 Main news related to the CCS TSI 2023 (2023/1695)
Main news related to the CCS TSI 2023 (2023/1695) Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH . Mariano G Tinti - Decoding SpaceX
Mariano G Tinti - Decoding SpaceX Mariano Tinti
A project that aims to unveil some insights from SpaceX UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6 DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus Zilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently. Taking AI to the Next Level in Manufacturing.pdf
Taking AI to the Next Level in Manufacturing.pdf ssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.Recently uploaded (20)
Project Management Semester Long Project - Acuity
Project Management Semester Long Project - Acuity
Webinar: Designing a schema for a Data Warehouse
Webinar: Designing a schema for a Data Warehouse
Skybuffer SAM4U tool for SAP license adoption
Skybuffer SAM4U tool for SAP license adoption
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Fueling AI with Great Data with Airbyte Webinar
Fueling AI with Great Data with Airbyte Webinar
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
June Patch Tuesday
June Patch Tuesday
Artificial Intelligence for XMLDevelopment
Artificial Intelligence for XMLDevelopment
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to use Firebase Data Connect For Flutter
How to use Firebase Data Connect For Flutter
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays - June 2024
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Main news related to the CCS TSI 2023 (2023/1695)
Main news related to the CCS TSI 2023 (2023/1695)
Mariano G Tinti - Decoding SpaceX
Mariano G Tinti - Decoding SpaceX
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Taking AI to the Next Level in Manufacturing.pdf
Taking AI to the Next Level in Manufacturing.pdf
Wcdma
- 1. Technical Seminar Presentation “W-CDMA” National Institute of Science and Technology [1] Presented by Sangram Keshari Nayak Roll#EC200117075 Under the guidance of Mr. N. Srinivasu Sangram Keshari Nayak(EC200117075)
- 2. Technical Seminar Presentation WHAT IS W-CDMA? National Institute of Science and Technology [2] W-CDMA stands for wideband code division multiple access A 3G network having higher capacity Uses a spectrum with 5MHz carrier Sangram Keshari Nayak(EC200117075)
- 3. Technical Seminar Presentation GENERAL INFORMATION ON CDMA National Institute of Science and Technology [3] How does CDMA work ? What is the difference between CDMA one and CDMA2000? Sangram Keshari Nayak(EC200117075)
- 4. Technical Seminar Presentation GENERAL INFORMATION ON CDMA National Institute of Science and Technology [4] What is the difference between umts and wcdma? • Universal Mobile Telecommunications System (UMTS) Wideband Code Division Multiple Access (WCDMA) is an air interface standard and it is the key technology for UMTS. Sangram Keshari Nayak(EC200117075)
- 5. Technical Seminar Presentation W-CDMA BASIC CHARACTERISTICS National Institute of Science and Technology [5] Bit-error rate Acquisition and tracking of the spreading sequences Power control Fading statistics Sangram Keshari Nayak(EC200117075)
- 6. Technical Seminar Presentation SPREAD SPECTRUM CODING National Institute of Science and Technology [6] Performance characteristics of wcdma Sangram Keshari Nayak(EC200117075)
- 7. Technical Seminar Presentation PARAMETERS OF WCDMA National Institute of Science and Technology [7] Data and chip rate Channel bandwidth Spreading and modulation Handover Sangram Keshari Nayak(EC200117075)
- 8. Technical Seminar Presentation W-CDMA DESIGN ISSUES 1.TURBO CODING National Institute of Science and Technology [8] Turbo Encoder Sangram Keshari Nayak(EC200117075)
- 9. Technical Seminar Presentation W-CDMA DESIGN ISSUES National Institute of Science and Technology [9] TURBO DECODER Sangram Keshari Nayak(EC200117075)
- 10. Technical Seminar Presentation W-CDMA DESIGN ISSUES National Institute of Science and Technology [10] 2. INTERFERENCE-CANCELLATION TECHNIQUES Interference Cancellation Concept Sangram Keshari Nayak(EC200117075)
- 11. Technical Seminar Presentation WCDMA SYSTEM National Institute of Science and Technology [11] Sangram Keshari Nayak(EC200117075)
- 12. Technical Seminar Presentation RADIO NETWORK FUNCTIONALITY National Institute of Science and Technology [12] Power control Soft handover Soft Hand Over Process Sangram Keshari Nayak(EC200117075)
- 13. Technical Seminar Presentation UPGRADE GSM TO WCDMA National Institute of Science and Technology [13] Wcdma channels Sangram Keshari Nayak(EC200117075)