Cutting-Edge PCB CAM and Design Services For Streamlined and Efficient PCB Production
Streamline your PCB production with our Customized PCB CAM and Design services. From PCB design to manufacturing, we offer end-to-end solutions that streamline the production process and deliver high-quality, reliable PCBs.
Get Free Quotation Now!
What Do We do At Questinfosense PCB CAM Service?
We at Questinfosense offer a full-featured and dedicated CAM facility for the pre-manufacturing (post-processing) of Gerber data, within 24 hours, quick response service. With overnight service, you have a time zone edge over your rivals and can respond to consumer needs more quickly. It is efficient, less expensive, reduces capital expenditures, and boosts profit margin.
PCB Scripting & HyperTooling
Scripting – This enables the customer to acquire the necessary scripts they need for their production requirements in their Genesis system.
HyperTooling – This is a JAVA based program that can be developed to be used in UCAM to automate some routine tasks in tooling.
Tooling – This is accomplished through a pool of engineers who are able to process design data from data input, perform cleanup, carry out DRC/DFM and board edits, and perform any tasks up to the output.
PCB CAM Services
Full-fledged and dedicated CAM facility for the post-processing of Gerber data (Pre Manufacturing)
24/7 services to cater to the requirements of customers worldwide
State of the art Software/Hardware and Communication infrastructure
Single-layer to multi-layer as per IPC standard
Surface mount, Ball Grid Array & Through-hole design with blind and buried vias
Split ground planes and power planes for mixed signals
High-speed design, early analysis and design optimization
Post layout analysis for signal integrity, impedance match
Netlist Analysis
Reliability Analysis
Thermal Analysis
Editing and Optimization
Rout and retain
Step and repeat with break-away tabs
Slots, Scoring, V-cuts, Routing
Tear dropping
Multiple circuit panelization
Creation of test coupons
PCB Design Rule Checks /Analysis
We run an exhaustive list of design rule checks for all boards to avoid an error that can possibly cause board scrap. All features are thoroughly checked for violations before the board is panelized.
Some of the checks are:
A mismatch between Fabrication Drawing and Gerber.
The separation between segments.
Minimum track width.
Open trace/Hanging traces.
Power to ground short detection.
Annular ring verification.
Distance between holes to the copper segment.
Expose Trace.
From PCB Concept to Production, We Have Covered Your Back..!!
Our PCB CAM and Design services cover the entire product development process, from concept to production, ensuring that your designs meet your specifications and are ready for manufacturing.
Let's Talk
What we can do in PCB CAM Service !
Editing / Single Image
We are running a large number of DFM (Design for Manufacturability) actions on various layers, such as Signal, Solder Mask, Silk Screen layers to ensure productivity.
Some DFM operations that we carry out are:
Analysis of Gerber data with Fab drawing
Board outline dimensions.
Hole Size, Hole Count & Tolerances.
Stack up information, Finish type and Board thickness.
Special requirements for the Text and Logos.
CAPABILITIES
Full panelization for single sided, double sided and multi layer boards.
Generate drill and routing program from AutoCAD/DXF or Gerber files.
Error detection services/quality check
Data accepted by e-mail / ftp site.
Data in Gerber, RS-274X, DXF, PDF, HPGL, AutoCAD & ASCII or NC Drill formats are accepted.
Tools like ,Ucamco Ucam , and Genesis 2000 used.
Analysis
Missing Hole, Extra Hole or Close Holes.
Touching Holes/Duplicate Holes.
Checking for the 2nd drill option.
Minimum spacing between two conductors.
Minimum Track width.
Minimum Annular ring.
Drill/rout to conductor spacing.
Sliver.
Thermal air gap/spoke width.
Drill to copper plane spacing.
Plane shearing line width.
Mask annular ring for copper pad.
Expose trace.
Mask to copper spacing.
Legend width.
Special Products
Gold Finger.
Controlled Impedance.
Via-plug, Peelable mask, Carbon Ink.
Flip flop panelization.
Flat Pad.
Flex & Flex Rigid.
Cleanup
Draws to flash.
Pad Registration.
NFP Removal
Redundant pad and line removal.
Line unification.
Countrization of self-intersecting polygons.
Sliver in acute angles.
SMD attributes.
Legend Detection.
Optimization
Power ground optimization.
Signal layer optimization.
Teardrop creation.
Solder mask optimization.
Legend overlap.
Copper Balancing.
Etch Compensation.
Programming & outputs
NC Drill and rout programs.
After drill and before etching rout program for plated edges.
Second stage drill program.
Counter bore/Counter /sink.
Panel with Tab rout/Break out pips
Peck Drill/G85.
Control Depth Rout.
Score Program.
Tool path generation.
Cover layer and Stiffener programs.
Netlist Comparison
Netlist comparison of IPC netlist and CAD data.
Netlist comparison with processed data and customer data.